No Standard Description Revisi Year
1 NACE - MR0103 Material Resistant to sulfide Strees Cracking in Corrosive petroleum Refining Environment 2010
2 NACE - MR0175 Petroleum and natural gas industries Materials for use in H2S containing environments in oil and gas production 2009
3 NACE - RP0775 Preparation and Installation of Corrosion Coupons and Interpretation of Test Data In Oilfield Operation
2005
3 ASME B16.5 Pipe Flanges and Flanged Fittings - Pipe Flanges and Flange Fittings standard covers pressure temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe flanges and flanged fittings. 2009
4 ASME B.16.34 Valves Flanged, Threaded, and Welding End - Applies to new construction and covers pressure-temperature ratings, dimensions, tolerances, materials, nondestructive examination requirements, testing, and marking for cast, forged, and fabricated flanged, threaded, and welding end and wafer or flangeless valves of steel, nickel-base alloys, and other alloys . 2009
5 ASME B.31.1 Power Piping - Prescribes minimum requirements for the design, materials, fabrication, erection, test, and inspection of power and auxiliary service piping systems for electric generation stations, industrial and institutional plants, central and district heating plants, and distinct heating systems. 2010
6 ASME B.31.3 Process Piping - Design of chemical and petroleum plants and refineries processing chemicals and hydrocarbons, water and steam. This Code contains rules for piping typically found in petroleum refineries, chemical, pharmaceutical, textile, paper, semiconductor, and cryogenic plants, and related processing plants and terminals. 2008
7 ASME B 1.20.1 Pipe Threads, General Purpose (Inch) - Covers dimensions and gaging of pipe threads for general purpose applications. 1983
8 ASME SECTION VIII Pressure Vessel - requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. 2010
9 MESC SPE 77 / 165 Integral Double Block And Bleed (DBB) valve Assemblies
10 MESC SPE 77 / 200 Valves In Low Temperature And Cryogenic Service.
11 MESC SPE 77 / 300 A Synopsis of Procedure And Techinical Specification For Type Acceptance Testing (TAT) Of Industrial Valves
12 MESC SPE 77 / 302 Valves - general requirements
13 MESC SPE 77 / 312 Fugitive Emission Production Testing
14 MESC SPE 85 / 202 Material selection guide for soft seats, ‘O’-ring seals and Lip-seals.
15 MESC SPE 85 / 203 Graphite - technical specification
16 API 607 Fire Test for Soft-Seated (Fire safe) 2010
17 API 598 Valve Inspection and Testing. The standard covers inspection, supplementary examination, and pressure test requirements for both resilient-seated and metal-to-metal seated gate, globe, plug, ball, check, and butterfly valves. Pertains to inspection by the purchaser and to any supplementary examinations the purchaser may require at the valve manufacturer's plant. 2009
18 API 6D Specification for Pipeline Valves. API Specification 6D is an adoption of ISO 14313: 1999, Petroleum and Natural Gas Industries-Pipeline Transportation Systems-Pipeline Valves. This International Standard specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems. 2008
19 API 6A "Specification for Wellhead and Christmas Tree Equipment, recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of wellhead and christmas tree equipment for use in the petroleum and natural gas industries.
This International Standard does not apply to field use, field testing or field repair of wellhead and christmas tree equipment." 2008
20 ASME PTC 19.3 - 1974 Temperature Measurement Instruments and Apparatus 2010
21 A.H MOUSELLI Offshore Design , Analysis and Method
22 ASTM A694 Standard Specification for Carbon and Alloy Steel,Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service 2008
23 ASTM G1-81 ASTM G181 - 04(2009) Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions 2009
3 ASME B16.5 Pipe Flanges and Flanged Fittings - Pipe Flanges and Flange Fittings standard covers pressure temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe flanges and flanged fittings. 2009
4 ASME B.16.34 Valves Flanged, Threaded, and Welding End - Applies to new construction and covers pressure-temperature ratings, dimensions, tolerances, materials, nondestructive examination requirements, testing, and marking for cast, forged, and fabricated flanged, threaded, and welding end and wafer or flangeless valves of steel, nickel-base alloys, and other alloys . 2009
5 ASME B.31.1 Power Piping - Prescribes minimum requirements for the design, materials, fabrication, erection, test, and inspection of power and auxiliary service piping systems for electric generation stations, industrial and institutional plants, central and district heating plants, and distinct heating systems. 2010
6 ASME B.31.3 Process Piping - Design of chemical and petroleum plants and refineries processing chemicals and hydrocarbons, water and steam. This Code contains rules for piping typically found in petroleum refineries, chemical, pharmaceutical, textile, paper, semiconductor, and cryogenic plants, and related processing plants and terminals. 2008
7 ASME B 1.20.1 Pipe Threads, General Purpose (Inch) - Covers dimensions and gaging of pipe threads for general purpose applications. 1983
8 ASME SECTION VIII Pressure Vessel - requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. 2010
9 MESC SPE 77 / 165 Integral Double Block And Bleed (DBB) valve Assemblies
10 MESC SPE 77 / 200 Valves In Low Temperature And Cryogenic Service.
11 MESC SPE 77 / 300 A Synopsis of Procedure And Techinical Specification For Type Acceptance Testing (TAT) Of Industrial Valves
12 MESC SPE 77 / 302 Valves - general requirements
13 MESC SPE 77 / 312 Fugitive Emission Production Testing
14 MESC SPE 85 / 202 Material selection guide for soft seats, ‘O’-ring seals and Lip-seals.
15 MESC SPE 85 / 203 Graphite - technical specification
16 API 607 Fire Test for Soft-Seated (Fire safe) 2010
17 API 598 Valve Inspection and Testing. The standard covers inspection, supplementary examination, and pressure test requirements for both resilient-seated and metal-to-metal seated gate, globe, plug, ball, check, and butterfly valves. Pertains to inspection by the purchaser and to any supplementary examinations the purchaser may require at the valve manufacturer's plant. 2009
18 API 6D Specification for Pipeline Valves. API Specification 6D is an adoption of ISO 14313: 1999, Petroleum and Natural Gas Industries-Pipeline Transportation Systems-Pipeline Valves. This International Standard specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems. 2008
19 API 6A "Specification for Wellhead and Christmas Tree Equipment, recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of wellhead and christmas tree equipment for use in the petroleum and natural gas industries.
This International Standard does not apply to field use, field testing or field repair of wellhead and christmas tree equipment." 2008
20 ASME PTC 19.3 - 1974 Temperature Measurement Instruments and Apparatus 2010
21 A.H MOUSELLI Offshore Design , Analysis and Method
22 ASTM A694 Standard Specification for Carbon and Alloy Steel,Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service 2008
23 ASTM G1-81 ASTM G181 - 04(2009) Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions 2009
No comments:
Post a Comment